Edit Submission Essay Example | Topics and Well Written Essays - 500 words

Edit Submission - Essay Example e common in the interaction with the political figures has been addressed by the numerous political forums that are available on the social media and networks. The grievances and complaints of the citizens of any country can be expressed to the officials in a far more reliable and fast manner than before. The emergence of any news on the web is analogous to fire in a dry forest in the modern times. Any act of misconduct by the government cannot be hidden since people have acquired greater power to voice their opinions with the advent of the internet. The recent uprising in the Arab countries, such as Egypt, Libya, could not have been arranged with such unity and effectiveness if the social media and networks had not been available. The risings were led by no apparent leaders but at the spur of collective thinking and ideas. The dictatorial nature of the leadership in those countries always forbade any expression of negativity towards the rulers; however the accumulation of agitation among the masses on the web transformed into a historical revolution that freed the people from years of dictatorship. The citizens are more aware about the prevailing political activities which make them capable of possessing a strong opinion about everything in their societies. These opinions are known to gain voice on the political forums which can prove to influence the core objectives of the political parties. Democratic parties tend to rely on such internet communication even more than dictatorial rule. Specifically, the communication and campaigning is noticed to escalate in the times of the elections. An apparent benefit of political communication over the internet is that the political parties can evaluate the responses and comments of their voters and strategize their actions accordingly. This proves to become an on-going survey for the political parties since the success or failure of any event or procedure can be retrieved on an immediate basis via social

Deon Meyer Dead Before Dying Essay Example | Topics and Well Written Essays - 2500 words

Deon Meyer Dead Before Dying - Essay Example Whereas it cannot be argued that Death Before Dying should be understood as a pinnacle achievement of literature, it nonetheless engages the reader in several levels of understanding concerning violence and its role within the culture and expectations of Africa. Within such an understanding, the following analysis will seek to perform a literary analysis upon Death Before Dying as a means of highlighting and underscoring the level of prejudice and implied expectations that the author conveys within this particular book.... ever having been there, he/she will most likely leverage a prior level of understanding and/or stereotypes that are somewhat universal and exist in the minds of the majority of readers. By utilizing such a tactic, it is possible for the author to convey deep shades of meaning in only a few words.5 Such is very much the case in the novel in question. Rather than spending the first half of the book describing the cultural elements and unique levels of understanding that help to define violence within Africa, the author instead leverages this expectation of violence as a means of cementing the existing prejudices that are evident with regards to Africa.6 Although this is not the author’s main criteria, it nonetheless functions as a powerful means of securing a vivid and profound image in the mind of the reader and reinforcing that image as the storyline progresses.7 Though it might seem as somewhat silly for the reader to expect a simple novel as a possible opportunity to become further informed concerning the realities that define life and understandings of violence within Africa, the ultimate fact of the matter is that this form of media is precisely the type of information that serves to either crush or reinforce existing stereotypes within the minds of the reader.8 As such, the author begins the novel with a terse presentation of the current state of South Africa. From the very opening lines, the reader can infer that something of a powerful expectation for violence is instilled not only within the main characters but also within the media and general population of the nation as well. As a means of even further reinforcing such an understanding, the author tacitly alludes to violence serving the media and the populace as something of a means of interest. Although

Literature Review Of Production Planning And Controlling Accounting Essay

Literature Review Of Production Planning And Controlling Accounting Essay Last year couple of authors tried their best to attempt to identify production planning and control (PPC) top authors. Fernandes, et al. published an article whose main goal is to classify the top PPC authors by means of a survey on PPC researchers. They identified top 10 authors, their influence and impact in PPC. The main contributions of Fernandes et al. (July 2009, pp. 461-478(18)) Identified (among a great number of books regarding PPC) the books that has more influence on the PPC area, Guided the study of PPC by means of presenting the main books and authors of PPC, Showed the most valuable work of the PPC top authors, initiating a process of determining who the PPC gurus are. Gonzalez, et al. (July 2008, pp. 461-474) investigated the relationship between planning reliability and project performance and found out that variability is a well-known problem in construction projects which leads to the general deterioration of project performance. In this paper, the authors report on a detailed research analyzing this relationship during the construction phase of a home building project at activity and project levels. By doing so, two indexes proposed An activity planning reliability index called the process reliability index (PRI) A project aggregate labor productivity index, called the project productivity index (PPI). Statistical analyses using the proposed indexes conducted showing positive and strong relationships between planning reliability and performance at activity and project levels. The research findings provide the guidelines of a preliminary methodology to forecast the impacts of planning reliability over project performance when lean production methodologies are applied in project planning and control. Orsoni et al. (July 2007, pp. 19-31) Tried to explain remote scheduling of production activities they said remote scheduling is a fast growing area of research in the wider area of Production Planning and Control (PPC). Many solutions reported in the literature and many scheduling tools are currently available, however, the criteria for their evaluation and comparison remain loosely defined. This paper proposes an overview of existing solutions highlighting their advantages and limitations, to support academics and industrial users in their choices of scheduling techniques and Inter Process Communication (IPC) solutions for the remote and online scheduling of production. This paper also proposes design guidelines and performance measures against which production managers can evaluate and improve their solutions. Lima, R. M. et al. (October 2006, pp. 3693-3709) did some work on distributed production planning and control agent-based system and said remote scheduling is a fast growing area of research in the wider area of Production Planning and Control (PPC). Many solutions reported in the literature and many scheduling tools are currently available, however, the criteria for their evaluation and comparison remain loosely defined. This paper proposes an overview of existing solutions, highlighting their advantages and limitations, to support academics and industrial users in their choices of scheduling techniques and Inter Process Communication (IPC) solutions for the remote and online scheduling of production. Stevenson, Mark (Feb2006, pp. 767-790) conducted research on Refining a Workload Control (WLC) concept to improve the applicability of the approach to the shop characteristics found in practice. This is a two-stage process leading to significant conceptual refinements to a key WLC methodology. The first stage focuses on the development of a Decision Support System (DSS) based on a WLC concept designed for Make-To-Order (MTO) companies. Refinements made include changes to the backwards scheduling procedure and the way in which jobs are released onto the shop floor. The second stage focuses on the process of implementation. Using a case study of a MTO company, the paper describes the strategy taken to overcome a number of prerequisites to the successful implementation of a Production Planning and Control (PPC) concept. Issues addressed include grouping machines and determining capacities. This case study adds to the available literature by looking specifically at implementing WLC from the customer enquiry stage, while the case study experience also provides further refinements to the WLC concept. Manufacturing companies often complain about the difficulties they face in meeting their customers logistic requirements. Many blame the perceived inadequacies of their production planning and control (PPC) software for their performance deficits. PPC software is just one of six configuration aspects of the entire PPC system. The authors argue that the configuration of the PPC aspects objectives, processes, objects, functions, responsibilities and tools has carried out methodically and consistently in order for the PPC system to function properly. The analysis of examples of so-called `stumbling blocks of PPC, inadequate configurations of one or several of the aspects supports this claim. There investigation closes with the proposal of a checklist that the authors suggest as a first approach to ensure the consistent configuration of PPC systems. (Wiendahl et al. Oct 2005). Investigated Stumbling blocks of PPC they found out M. Stevenson et al. (March 2005, pp. 869-898) presented a review of production planning and control. The paper reviews classic approaches to Production Planning and Control (PPC) such as Kanban, Manufacturing Resource Planning (MRP II) and Theory of Constrains (TOC) and elaborates upon the emergence of techniques such as Workload Control (WLC), Constant Work In Process (CONWIP), Paired cell Overlapping Loops of Cards with Authorization (POLCA) and web- or e-based Supply Chain Management (SCM) solutions. A critical assessment of the approaches from the point of view of various sectors of the Make-To-Order (MTO) Industry presented. The paper considers factors such as the importance of the customer enquiry stage company size degree of customization and shop floor configuration and shows them to play a large role in the applicability of planning and control concepts. The paper heightens the awareness of researchers and practitioners to the PPC options, aids managerial system selection de cision-making, and highlights the importance of a clear implementation strategy. WLC emerges as the most effective Job Shop solution; whilst for other configurations there are several alternatives depending on individual company characteristics and objectives. The paper outlines key areas for future research, including the need for empirical research into the use of Workload Control in small and medium sized MTO companies. Zà ¼lch G.,  Fischer J. (March 2003, pp. 146-154) enumerated that during the realization of the CAESAR planning games, which has been supported by the European Leonardo da Vinci Programmed the use of modular planning games within a global scenario has shown to be very effective in concisely relaying educational content from the area of production management. In particular the close-to-reality situations have proven time and again to be highly motivating for seminar participants. In order to improve the transferability of acquired knowledge into practice the IFAB-Institute of Human and Industrial Engineering of the University of Karlsruhe has further developed the INSIGHTS-PPC planning game for production planning and control in such a way that the planning tasks to be tackled are set in direct relation to market similar repercussions. This realized in a new market share model. The market share model explained, paying particular attention to the practical consequences, which come a long with the implementation of such a model. Despite the potential of the developed market share model and the positive feedback from seminar participants there is a risk of the participants being diverted from the intended educational content, that of production logistic fundamentals and techniques, and of them perceiving the focus of the seminar as a relaying of market mechanisms. Starbek M.   Grum J. (December 2000, pp. 443-450) found out there is much computer-aided production planning and control (PPC) systems available on the market which can provide a solution to the complex task of production planning and control. However, the question remains, how can a company find an optimal system from the vast amount of available systems? Olhager J.   Wikner J. (April 2000, pp. 210-222) worked on Production planning and control tools, There are numerous tools available to be used for production planning and control purposes. The number of tools is ever increasing, and so are the levels of sophistication as well as complexity. For the specific manufacturing firm, the task of selecting the most appropriate set of tools is not trivial. However, in recent years, the understanding of the relationship between tools and manufacturing environments for which they are suitable has increased. The purpose of this paper is to provide an overview of production planning and control tools available today, as well as new trends, issues and ideas. Wiendahl et al. (December 1999, pp. 718-726) touched a general approach to disassembly planning and control and their findings are closing product and material cycles have emerged as a paradigm for industry in the 21st century, and are directed towards an economical and responsible use of our limited resources. Disassembly plays a key role in recycling. It enables the recovery of functioning components for re-use of pure materials for re-utilization and the separation of harmful substances. Major challenges presented by the enormous variety of products disassembled, by uncertainty as to quantity and by their unknown properties. An appropriate planning and control of disassembly processes is essential for an economic disassembly. Based on an investigation of the suitability of common production planning and control (PPC) methods for disassembly, a specific disassembly planning and control concept (DPC) outlined. Moscoso P. G et al. (November 1999, pp. 1492-1506) Investigated on modeling framework for complementary design of production planning and control systems and said In a business era characterized by a dazzling rate of change, the improvement of production planning and control begins to be a main objective for manufacturing industries. This paper postulates four main statements to be considered for the design of production plans and control systems (PPC-systems) comprising human and technical sub-systems. The first is that production models required for the design of PPC-systems (i.e. design models) cannot be identical to production models required for planning and control of production systems (i.e. regulatory models). The design of PPC-systems must primarily focus on the quality of interaction between the regulatory models. This insight supports the second statement, which postulates that the design of PPC-systems requires a complementary design approach. Complementary design means t o take explicitly into account that human and technical sub-systems- based on the differences in strengths and weaknesses of both- can achieve through their interaction a new quality, possible neither to human nor technical sub-systems alone. The third statement is that a complementary design of PPC-systems will only be possible if a fundamental change of mind from a static to a dynamic as well as from a technical to a socio-technical perception (i.e. a complete perception) of production systems takes place. Without a complete perception of production systems, designed PPC-systems will not be sufficiently reliable, maintainable and flexible, will be difficult to comprehend, and their elements will not be re-usable for further applications. The fourth statement is that the integral support of the design process requires a dual modeling framework comprising a meta- and an object-model. Considering these fundamental insights that were confirmed by a practical case study, a dual modelin g framework for the design of PPC-systems which incorporates criteria for complementary design is outlined. Tatsiopoulos I. P.   Mekras N.D. (July 1999, pp. 414-425) tried to find out an expert system for the selection of production planning and control software packages and presents a rule-based expert system that can be used for the selection of a suitable production planning and control (PPC) software package to be applied in a manufacturing firm. A production systems typology and a compact PPC software reference model are included in the knowledge base, which created. The inferences made based on rules that relate a semantic network of PPC software features with a semantic network of production systems attributes. The results given by the expert system include the module architecture and the set of features of the PPC software package, which are applicable in a certain manufacturing setting. Wiendahl H-P.   Breithaupt J-W. (June 1999 pp. 389-401) Worked on modeling and controlling the dynamics of production systems and infrared that nowadays, in a fast-changing production environment, companies have to adapt their production structures rapidly. Therefore new methods for production planning and control (PPC) are required that consider these dynamic changes. Todays PPC systems mainly based on static models now a dynamic production model has been developed applying methods of control theory. Using the funnel model and the theory of the logistic operating curve, a continuous model of a single production system developed. For the control task, backlogs as well as a work-in-process (wip) controller developed. The controllers interact to adjust the capacity and input rate of the work system to eliminate the backlog as soon as possible and to set the wip to a defined level. Simulation experiments confirm that this concept ensures the synchronization of capacity and work. In an ongoing research project, an extended model for several work systems connected via the material flow designed, which based on the elementary one. A suggestion to integrate the strategy into PPC on the planning level already been generated. The objective of this approach is to develop the present open-loop control realized in PPC into a closed-loop control with defined control and reference variables. Gaalman G.J.C.   Suresh N.C. (February 1999, pp. 5-17) Conducted research work towards an Integration of Process Planning and Production Planning and Control for Flexible Manufacturing Systems and this introduction article attempts to present some major issues relating to the integration of process planning and production planning and control (PPC) for flexible manufacturing systems (FMSs). It shows the performance of an FMS significantly improved and FMS capabilities more effectively utilized by integrating process planning and PPC functions. The various types of flexibility to be planned and provided for in process planning and manufacturing are summarized in the article, as well as emerging conceptual frameworks for integration, along with their implementation requirements and problems. Distinctive elements that differentiate these frameworks, such as the extent of integration of process planning and PPC activities, number of alternative process plans, and the time at which nume rical control programs are generated, are discussed, followed by a brief summary of the articles compiled for this special. Luczak H. Et al. (July 1998, pp. 448-456) Analyzed PPC-systems, re-engineering or replacement and concluded the growing number of production enterprises that use software systems to support the production planning and control (PPC-systems) and the limited life-time of these systems imply that many enterprises have to decide whether or not an existing PPC-system is worthwhile reengineering. The factors that have an impact on this decision are non-quantifiable. Porter, J.K. et al. (1996) discussed Production planning and control system developments in Germany and briefly explained the impact of MRP on UK manufacturing industry in the context of the next generation of developments. Draws a contrast with production planning and control systems in Germany, which derive shop floor control through different architecture of business control systems. Presents the state of these developments in Germany as analyzed by a leading academic institution (the FIR at Aachen University of Technology). Compares this with UK developments, as seen by the Liverpool short-term scheduling group, which recently has analyzed production planning/ scheduling practice in a range of different companies across various industry types. In early 1990s computer aided process planning with relation to production planning and control brought into practice, which provided integration between both of them. Hermann Kà ¼hnle et al. (1994, pp. 21-27) Introduces concepts for the integration of Computer-Aided Process Planning (CAPP) and Production Planning and Control (PPC). Characterizes the current situation regarding integration by a one-way communication from CAPP to PPC, since a revised link not envisaged. Introduces a new approach to full integration by the extension of functions within both systems components as well as integration of both data and information technology.

Athleticism Essay -- Sports, Politics

When I think about the black athlete I experience both pride and discomfort. In America where black people are still politically and economically disenfranchised, it appears that athleticism is the realm where black people excel and dominate. The discomfort comes from the observation that ‘domination’ is only viable when the black male body is harnessed in a way that doesn’t challenge white supremacy in other arenas (Collins, 2005). His body is controlled by contracts of powerful owners, regulated by standardized rules and by-laws from sporting associations and placed in physical spaces where his bodily performance is a spectacle for largely white audiences. There is something historic and normal about the sporting performance that has at once, drawn me in and isolated me. I didn’t quite know why. Ben Carrington’s work Race, Sport and Politics helps me to understand that these boundaries and meanings mark and define ‘the black athlete’ a nd that they can be understood as sites of political struggle. From the onset, I was captivated by his careful and through analysis of various social frameworks in order to utilize sports as a lens to understand the â€Å"intra relationship† between racial discourse, the performance of sport, and the politics in making the ‘black athlete’. In this paper I will explore the various concepts and contentions Carrington discovers as they apply to black males while he tries to formulate a framework to understand the complexity of race and sport and the politics created therein. I will focus on the key concepts essential to creating his theoretical framework specifically, ‘the black athlete’, the ‘white colonial frame’, and the ‘sporting black Atlantic’. The black athlete is a political entity and a global s... ...ind of black humanity. This actor performed feats of brute, physical, endurance, and ‘natural’ prowess which would place him in a category of animalistic sub-humanity. The assumed all body and no mind position of many of the African Diaspora. However within the sanctuary of modern sport, these feats became exceptionally superhuman; a show of raw masculinity and rational dexterity. As a political act, Johnson’s defeat of his white component sent ripples thought the world and attacked the foundation on which the very system that subordinated him was built. Using Carrington’s sense of the sporting black Atlantic. We can fully understand the significance and ramification of this feat. We can come to understand the global implications of this win for black people and see Jackson's â€Å"diasporic politicization† and his rise as an â€Å"anti white supremacist figure (p. 18)†.

Philosophy Exam Questions Essay

What is Plato’s theory of recollection? What is it about and how does it work?   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Plato’s theory of recollection states that all knowledge a person has ever known or will know already exists in his/her memory. As a result, time and learning are simply illusions; they are the process of remembering everything. To prove his theory, Plato presents an example. It concerns Socrates and a slave. Socrates gives the slave a series of geometrical diagrams and questions, asking him to solve them. The slave does so, without having any mathematical training before. Thus, because the slave was able to do so, Socrates says that the only he could was because he had prior knowledge in a previous existence and was simply recollecting that knowledge. Plato held that it is better to suffer injustice than to commit one. Why? What is Plato’s theory of justice?   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Plato’s theory of justice states that, on an individual level, justice is a human virtue responsible for making a person consistent and good; on a social level, justice is what makes a society harmonious and good. Therefore, to suffer an injustice is better, as the person suffering that injustice remains virtuous. The virtue stems from maintaining one’s values, both as an individual and within society. Discuss Plato’s view of death. What is the nature of death for Plato, and what, in his view should be the philosopher’s reaction to the prospect of it? Explain.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Plato’s view of death is presented in the Phaedo, and is of a nonchalant nature. He believes that death is something that should not be feared, as it is the natural course of things to come to life, as well as to die. Through Socrates, he maintains that one of the goals of practicing philosophy is to prepare for death. He believes that it frees the soul from the body as much as possible while one is still alive. Therefore, death is something of a virtue, as it prepares one for having an immortal soul. How does God function in the views of Descartes and Berkeley?   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Both Descartes and Berkeley use the concept of God in their arguments by introducing God as the cause of a person’s ideas. However, this is where the similarity ends. Descartes states that God is the only possible cause of the idea of God, while matter is the cause of all other ideas. Berkeley states that God is the only possible cause of all ideas. Thus, God is a Divine Mind from which all ideas come. Explain Descartes’ method of doubt. What is it and what is its value for philosophical enquiry?   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Descartes’ method of doubt is a philosophical strategy in which the goal is to defeat skepticism. One must begin by doubting the truth of everything, not just the evidence of the senses or the evidence of culture, but the fundamental process of reasoning itself. If a specific truth can survive this extreme challenge, then it must be completely true and thus, a certain foundation for knowledge. In regard to its value for philosophical enquiry, this method is much like Socrates’ method of seeking the truth. It allows one to go through various theories and muddle through various questions in order to seek their own truth. What is Descartes’ wax example about? How do you think Berkeley would explain the same event?   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Descartes believes that the human mind is capable of thought and perception. He explains this concept by way of an example concerning wax. It is evident that solid wax and melted wax are both wax. Therefore, perception is not just a function of the senses, but also a reasoning of the mind. The ultimate conclusion for Descartes, then, is the fact that the mind is the only thing that is definitively in existence. Berkeley would agree with Descartes, as he also believes that the mind is the only substance that truly exists. For him, the wax in both forms would not be considered an existing entity, as he does not believe that the physical world exists. What is Berkeley’s view of the distinction between primary and secondary qualities? How does his view differ from Descartes?   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Berkeley, upon examining the perception of things, came to the conclusion that any information he has must be considered secondary qualities. Therefore, they are functions of his mind. He rejects the existence of primary qualities, because to him, the mind is the only substance that exists. Descartes says otherwise. He believes that every substance has two types of properties. There is the primary quality, which is the heart of existence; then there is the secondary quality, which focuses on the senses. In simple terms, for Berkeley, there is no primary quality; for Descartes, there is. Describe Russell’s criticism of Berkeley’s idealism. Do you agree with his criticism? Explain.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   When criticizing Berkeley’s theory of idealism, Russell examines every aspect and counters each point with his own. He points out that Berkeley’s initial reasoning concerning sense-data are valid. However, it is from this point on that Russell begins to dispute Berkeley. He points out that the idea of something being in the mind is a bit difficult to understand, as his meaning of idea is confusing. In the end, Russell states that the ultimate fallacy of Berkeley’s argument is that one can apprehend what is in his or her mind. Finally, Russell states that the nature of knowledge completely refutes Berkeley’s argument.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Russell’s belief that Berkeley is incorrect in stating that ideas are of the mind is not completely acceptable. Berkeley’s concept is not hard to grasp, as it is in the mind that most ideas develop. Many of the concepts developed within philosophy stem from a simple idea formulated in one’s mind. Therefore, Berkeley is partially correct in his belief. However, Russell makes a valid point that if one believes that things only exist in the mind, the ability for man to gain knowledge would be limited. Since one does not want knowledge to be limited in any way, Berkeley’s concept of idealism can be dismissed in some regards. According to Russell, what is the point of doing philosophy?   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Russell does not provide a point, but rather an aim for doing philosophy. He states that the aim is to achieve knowledge through inquiry and criticism. However, philosophy does not contain certainties like other fields of study do. Yet, according to Russell, it is those very uncertainties that make the study of philosophy so vital to humanity. Thus, doing philosophy not only helps to find answers to questions about the world around, but it also helps to keep one inquisitive about that world.

Macbeth Motifs Essay

When it comes down to it, humans are mammals, and there are some animalistic traits that every mammal shares. The story of Macbeth by Shakespeare includes a theme that is the epitome of a trait that all mammals share, weak versus strong. Through the use of metaphors including birds, the symbolism of Macbeth as an owl throughout the story, and the juxtaposition between birds, weak versus strong is represented by the motif of birds in Macbeth. Birds are incorporated into other literary elements that Shakespeare utilizes, showing the true depth of his writing. Metaphors allow the reader to paint a picture of written words referencing images that they are familiar with. Like any other animal, there is a hierarchy of strength and therefore power for birds. The metaphors that Shakespeare incorporates into Macbeth including birds allow the reader to reference their experience with strong birds fighting to create an image of what the humans in the story might have been fighting like. A captain describes how valiantly Macbeth fought in the battles in the beginning of the story, saying that he was â€Å"as sparrows eagles†, which paints a picture of a valiant and strong eagle fighting a small, meek sparrow (1.2.35-42). However, later in the story, when Macbeth’s position shifts and he is no longer perceived as a noble soldier but rather as a tyrannical ruler preying on those he controls, birds are used in a metaphor again to illustrate a changed image of Macbeth. â€Å"A falcon, tow’ring in her pride of place,† representing honor and innocence, â€Å"was by a mousing owl hawked at and killed,† illustrating an evil bird using its strength to overpower and kill an innocent bird (2.4.11-14).Sometimes, a reader does not glean the true meaning of an object in a story until after it has been illustrated throughout the entirety of the work of literature. Throughout the uses of birds in Macbeth, including the imagery and metaphors, a pattern occurs where a powerful owl is preying on weaker birds, and by the end of the story the reader comes to realize that the owl is a representation of Macbeth and the acts he is committing. The owl referenced during the murder of Duncan, is described as an â€Å"obscure bird† that â€Å"clamored the livelong night† as he â€Å"heard i’ th’ air, strange screams of death† (2.3.49-56). The owl in this scene is a symbol for Macbeth discovering what he is capable of, and what new powers he receives when he utilizes his newfound strength against others. One example of how he uses his recent strength was when he decided to have everyone in Macduff’s castle unnecessarily murdered. In this scene Lady Macduff is expressing her anger toward her husband, but also reveals characteristics of Macbeth when she states that her husband is not equal to â€Å"the most diminutive of birds,† which â€Å"will fight, her young ones in her nest, against the owl† (4.2.6-14). Macbeth being represented by the owl in this context depicts him as a villain that is so hungry for control that he will go to such extremes as to attack a weak, defenseless bird and it’s young. Sometimes it is equally as important to illustrate the weak side of a relationship as the strong side because then the contrast between the weak and the strong is magnified for the reader. In Macbeth, Shakespeare utilizes this juxtaposition to make the theme of strong versus weak even more apparent by inserting some descriptions of birds that appear weak to make the acts done by the stronger birds even more horrific. The day before Duncan’s murder where a powerful, evil owl was present, Banquo and Duncan comment on the sweet, innocent birds at Macbeth’s castle, â€Å"this guest of summer, the temple-haunting martlet, does approve†¦that the heaven’s breath smells wooingly here† this illustrates their vulnerability and unawareness to the upcoming strike by Macbeth, making his actions seem even worse. When Lady Macduff tells her son that â€Å"thou’dst never fear the net nor lime, the pitfall nor the gin,† he responds with a question of why he should because â€Å"poor birds they are not set for†, meaning that because he would be such a weak bird, hunters would have no want for him (4.2.36-37). Just after making this point, the defenseless son of Macduff is murdered by the king Macbeth, making the reader question what kind of tyrant Macbeth has come to be. The use of birds in Macbeth by Shakespeare is used to develop the theme of weak versus strong when they are used in metaphors, when Macbeth is represented by a bird throughout the story, and by the juxtaposition of the weak and strong birds. The acts committed by the characters aroused emotions in the audience because they were not so unrealistic that the audience could not relate to them, they represented the mammal in humans, the animal inside of all of us that we attempt to constrain. Birds are essential to create this unsettling feeling because their rustic, animal-like nature is no unlike the animalistic traits we try to hide, which allows the reader or audience to relate with the motif.